Our Steel Trading

Strips of steel

Strips of steel with different thicknesses are used for many purposes, including armoring military vehicles and money transport vehicles. They are also used in many industries.

strips steel is a bulk steel material used to manufacture small steel components. Companies often buy this material in large coils, then cut and process it to create more petite strips. It is less than 24 inches (60.96 cm) in width, in thickness between 0.157 - 0.197 inches (4 - 5 mm). The strip steel is the most suitable choice for projects requiring small plates or steel pieces.steel strips are narrow, flat pieces of steel with precise dimensions and thickness. They are typically manufactured through hot or cold rolling processes, resulting in strips of varying widths and thicknesses to suit specific construction requirements.

HS CODE 720 719 20

Billet Steel

Steel billets are a semi-finished product used in steel production. They are created through a process of casting molten steel into a rectangular or square shape, which is then allowed to cool and solidify. This results in a solid, bar-shaped piece of steel that is suitable for further processing.

billets used in Ingots and billets are two commonly used metal shapes that have different sizes, shapes, and applications. Ingots are larger and commonly used in the production of sheet metal, wire, tubing, and large components for machinery. Billets are smaller and commonly used in the production of gears, shafts, and axles.

HS CODE 722 490 91

HS CODE 720 719 20

Rebar Bars

Rebar (short for reinforcing bar), known when massed as reinforcing steel or steel reinforcement, is a steel bar used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension. Concrete is strong under compression, but has low tensile strength. Rebar significantly increases the tensile strength of the structure. Rebar's surface features a continuous series of ribs, lugs or indentations to promote a better bond with the concrete and reduce the risk of slippage.

The most common type of rebar is carbon steel, typically consisting of hot-rolled round bars with deformation patterns embossed into its surface. Steel and concrete have similar coefficients of thermal expansion,so a concrete structural member reinforced with steel will experience minimal differential stress as the temperature changes.

HS CODE 721420

Scrap iron and steel

Iron and steel scrap also known as ‘ferrous metal scrap’ is a recyclable material which is left- over during the production of iron and steel products and fabrication of ferrous materials or generated at end of life of the ferrous products. Ferrous scrap is normally recycled during steelmaking. Amongst all kinds of ferrous scraps, steel scrap constitutes the maximum percentage. Ferrous metal scrap is the primary raw material for the production of liquid steel in the electric arc furnace and the induction furnace.

Ferrous metal scrap comes from several different sources and hence it differs both with respect to its physical and chemical characteristics. The quality of scrap affects greatly the economics of the steelmaking process. The age of a scrap shipment can vary from one day to over 100 years old. The properties depend on from where the scrap comes from and when the steel was produced. Different grades of steel are produced for variety of applications. It therefore becomes essential that the scrap is segregated generally by composition and size or grade suitable for melting in the recycling process so that it gives the maximum economic benefit and is as effective as possible.

Scrap metal can be refashioned into many new uses. For example, scrap iron and aluminum metals are used extensively in the construction industry for projects as varied as roads and bridges. As well, scrap metal is also used for manufacturing automobiles, aircraft, and other kinds of travel

HS CODE 72041000

Cold-rolled coils

Cold-rolled coils are a steel product produced by applying plastic deformation to hot-rolled steel on cold-rolling mills. With such processing, the product can have more accurate dimensional tolerances, better surface quality and improved mechanical properties as compared with hot-rolled coils.

In simple terms, cold rolling is an industrial process used to change the material properties of sheets or strips of metal. The metal is fed between two rollers which compresses it. The resulting mechanical properties vary, depending on how much strain is applied.

Cold Rolled: Cold-rolled steel coils exhibit higher strength and hardness due to the strain hardening that occurs during the cold rolling process. They offer improved dimensional accuracy and precise mechanical propertie

HS CODE 72262021

Railway Steel 

Strips of steel with different thicknesses are used for many purposes, including armoring military vehicles and money transport vehicles. They are also used in many industries.

strips steel is a bulk steel material used to manufacture small steel components. Companies often buy this material in large coils, then cut and process it to create more petite strips. It is less than 24 inches (60.96 cm) in width, in thickness between 0.157 - 0.197 inches (4 - 5 mm). The strip steel is the most suitable choice for projects requiring small plates or steel pieces.steel strips are narrow, flat pieces of steel with precise dimensions and thickness. They are typically manufactured through hot or cold rolling processes, resulting in strips of varying widths and thicknesses to suit specific construction requirements.

HS CODE 730 210 00